|
|
F A Q
FOR WIRE CLOTH |
|
|
|
METHOD OF WEAVE |
|
|
|
|
SQUARE
MESH, PLAIN WEAVE |
DUTCH
TWILLED WEAVE |
|
SQUARE
MESH. TWILLED WEAVE |
BROAD
MESH TWILLED DUTCH WEAVE |
|
REVERSE
PLAIN DUTCH WEAVE |
SINGLE
PLAIN DUTCH WEAVE |
|
|
|
|
MATERIAL
AVAILABLE
Stainless Steel
Wire, Plain Steel, Galvanized Steel, Copper, Brass, Phosphor
Bronze, Nickel, Aluminum, Aluminum Alloy.
|
|
APERTURE
WIDTH
Distance
between two adjacent warp or weft wires, measured in the
projected plane at the mid-positions.
|
|
MESH
The number of
openings per lineal inch measured from center of wire.
|
|
WIRE
DIAMETER
Diameter of the
wire in the woven cloth
|
|
PITCH
1) Distance
between the middle point of two adjacent wires.
2) Nominally the
sum of the aperture width and the wire diameter.
|
|
WARP
All wires running
lengthwise of the cloth as woven.
|
|
WEFT
All wires running
crosswise of the cloth as woven.
|
|
NUMBER
OF APERTURES PER UNIT LENGTH
Number of
apertures which are counted in a row one behind the other on
a given unit length.
|
|
OPEN
SCREENING AREA
1) Percentage of
the surface of all the apertures in the total screening
surface.
2) Ratio of the
nominal aperture width and the square of the nominal Pitch.
Rounded to a full percentage value.
|
|
